Ridge Plastic Steel Tile
Key words:
Key words:
Ridge Plastic Steel Tile
Classification:
Related Description
Installation Technical Guide
For the installation of our company's products on roofs, a slope of about 20% is recommended. When the span of the building exceeds 30 meters, the slope requirement should reach 25%.
Left and right.
The steel structure materials used for installing our products are recommended to be made of national standard materials, and their model and grade must meet the load-bearing requirements, ensuring consistency.
The ultraviolet light in the installation area must not exceed 50 mw/m², and the ambient temperature should be 50.
Do not directly cover our products on other products with different wave shapes and distances, nor directly cover them on metal tile surfaces, to avoid high temperatures causing PVC materials to deform.
PVC materials have thermal expansion and contraction properties, so the length of a single product should not exceed 10m to avoid excessive expansion and contraction, which could break the fixed screws or tear the installation holes.
The spacing of the purlins must be uniform, within 800mm (within the corresponding wave standard spacing requirements).
During installation, it is strictly prohibited for personnel to step across the product to avoid safety accidents or damage to the product.
Please drill holes in advance with a hand drill, using a plastic-specific drill bit, with a drill bit diameter 2-4mm larger than the fixed component's diameter.
(To allow for thermal expansion and contraction of the plastic), the edges of the holes should be kept smooth, avoid concentrated force, and be especially careful when drilling in cold weather. Ensure the product is well supported underneath during drilling.
All fixed components should be positioned at the ridge and ensure that the fixed components are perpendicular to the tile surface. The fixed components should not be overly tight to avoid deformation of the anti-corrosion tiles and leakage.
If necessary, appropriately increase the number of fixed components and wind pressure plates, ensuring that the length of the anti-corrosion tiles extending beyond the eaves purlin is within 100mm, and use strip stainless steel to tightly secure the entire frame to prevent the edge from being blown up by strong winds.
The horizontal overlap of the product must be done according to the dominant direction of wind and rain. Resin tiles, trapezoidal tiles, high wave tiles, and large round wave tiles should overlap one wave, while small wave tiles should overlap two waves. When the span of the building exceeds 24 meters, three waves should be overlapped.
The length of the vertical overlap should be 200mm, and the purlin should be positioned in the middle at the overlap point, with two additional fixed screws installed at the overlap.
1. Wave tile extrusion production line
Product use: Our company develops and produces various plastic wave tile extrusion complete sets of equipment, with extrusion raw materials including PVC, PP/PE, PC, ABS, PET, and other types of resins. The products produced are suitable for various usage environments and meet different market demands. Equipment can be customized according to special customer requirements.
Can be used for roofing and wall materials in factories, shopping malls, warehouses, greenhouses, sports fields, construction sites, etc.
Product characteristics: corrosion-resistant, flame-retardant, low-temperature resistant, green and environmentally friendly, etc.
2. Synthetic resin tile extrusion production line
The production line can produce PVC single-layer or ASA/PVC resin tiles.
Product characteristics: weather-resistant, anti-corrosion, insulation, self-cleaning, soundproofing, thermal insulation, and waterproof.
Product use: New rural reconstruction, flat-to-slope conversion, villas, self-built houses in rural areas, villas, tourist attractions, agricultural markets, balcony thermal insulation sheds, etc.
3. High-strength hollow tile production line
The hollow composite tile extrusion production line consists of a conical twin-screw extruder, extrusion molds, shaping systems, traction machines, cutting machines, etc., and can produce single-layer and double-layer hollow tile products.
Product features: thermal insulation, wind and earthquake resistance, fire insulation, lightweight and waterproof, green and environmentally friendly, easy to install, and flexible for use in various fields.
Product use: Agricultural greenhouses, factories, chemical and pharmaceutical industries, sports fields, warehouses, schools, temporary sheds, commercial buildings, etc.
4: FRP fiberglass daylighting tiles/panels production line
Product characteristics: can be customized to be flame-retardant, acid and alkali resistant, corrosion resistant, aging resistant, easy to install, high light transmittance, any coloring, rich in models, and high cost performance.
Product use: Can be used for industrial factory and civil building roofs, wall daylighting, and places with corrosive and dust safety hazards.
5. Fiberglass purlin production line
Product characteristics: solves the corrosion problem of metal purlins, replaces traditional square steel, has good acid and alkali resistance against chemical corrosion environments, lightweight and high strength, aging resistance, and excellent insulation.
Product use: FRP anti-corrosion purlins, building purlins, rolling mill purlins, smelting plant purlins, etc.
6. PVC anti-corrosion gutter equipment
7. Plastic steel edge banding equipment
8. Complete line accessory processing equipment
The introduction and improvement of a series of products have increasingly strengthened the company's advantages in large-scale manufacturing. After more than ten years of rapid development, the Deshiju brand has gained a reputation in the industry and has won high recognition in the market. It has a good reputation among numerous clients and distributors in the construction industry. We do not compete on price with peers but are committed to actions that strengthen the company's advantages in large-scale manufacturing.
Related Products
Welcome your message consultation
Service Hotline
Tell:+86-18986991288(General Tang)
+86-15071991888(Longzong)
+86-13797935688(Manager Jiao)
Address: No.3, Happiness Road, Dongbao Industrial Park, Jingmen City, Hubei Province
Mobile Scanner
This website already supports IPV4 / IPV6 bidirectional access
Copyright © 2025 DESHIJU ALL RIGHTS RESERVED.